Amiga Store from Amiga Kit
| 1 x | 40-way Male to Female IDE cable (4 Inches) |
|
Sub-Total: £4.06
|
|
02920 566233
 |
ZuluSCSI RP2040 SD Adapter
Availability: No delivery date or availability confirmed
Emulate a SCSI hard drive using modern SD card with ZuluSCSI
ZuluSCSI RP2040 is a new member of the ZuluSCSI product family, and is powered by the Raspberry Pi Foundation's RP2040 microcontroller, a dual-core 133MHz ARM Cortex-M0+ processor. Supports synchronous and asynchronous transfers, with read speeds up to eight megabytes/second. A SCSI controller with FAST SCSI and synchronous mode is required to achieve maximum speeds.
ZuluSCSI is a new generation of file-based SCSI HDD & CD-ROM emulators, and represents a fusion of SCSI2SD V5, V6, and concepts from other open source SCSI emulators. Hard drive and CD-ROM drive images are stored on a standard FAT32 or exFAT-formatted SD card. The ZuluSCSI firmware looks for file names which adhere to a simple but powerful naming convention, and presents them as the drives to the SCSI host. Each image file represents a SCSI drive.
Board dimensions are 90mm by 100mm
ZuluSCSI RP2040 board dimensions are identical to that of SCSI2SD V5.1/V5.2/V6. All mounting solutions that were designed for SCSI2SD V5.1/V5.2/V6 will work just as well with ZuluSCSI.
Features
Emulates up to 7 SCSI devices simultaneously, including CD-ROM
Speaks both SCSI-1 and SCSI-2
SCSI Termination is DIP-switch controlled
Firmware upgrade simplicity; As easy as placing a file on the SD card.
Highly configurable using a text-based ini file, zuluscsi.ini
External LED pin header for attaching remote LEDs.
Designed to be powered via SCSI termination power, when provided by the host
Optional DB25 pin header for direct installation of an external SCSI connector, in addition to the Single-Ended 50 pin IDC connector
Identical dimensions and mounting holes as that of SCSI2SD V5.1, V5.2, and V6, making it compatible with many existing SCSI2SD-specific mounting solutions
74LVTH125 SCSI bus transceivers
ZuluSCSI RP2040 is a new member of the ZuluSCSI product family, and is powered by the Raspberry Pi Foundation's RP2040 microcontroller, a dual-core 133MHz ARM Cortex-M0+ processor. Supports synchronous and asynchronous transfers, with read speeds up to eight megabytes/second. A SCSI controller with FAST SCSI and synchronous mode is required to achieve maximum speeds.
ZuluSCSI is a new generation of file-based SCSI HDD & CD-ROM emulators, and represents a fusion of SCSI2SD V5, V6, and concepts from other open source SCSI emulators. Hard drive and CD-ROM drive images are stored on a standard FAT32 or exFAT-formatted SD card. The ZuluSCSI firmware looks for file names which adhere to a simple but powerful naming convention, and presents them as the drives to the SCSI host. Each image file represents a SCSI drive.
Board dimensions are 90mm by 100mm
ZuluSCSI RP2040 board dimensions are identical to that of SCSI2SD V5.1/V5.2/V6. All mounting solutions that were designed for SCSI2SD V5.1/V5.2/V6 will work just as well with ZuluSCSI.
Features
Emulates up to 7 SCSI devices simultaneously, including CD-ROM Speaks both SCSI-1 and SCSI-2 SCSI Termination is DIP-switch controlled Firmware upgrade simplicity; As easy as placing a file on the SD card. Highly configurable using a text-based ini file, zuluscsi.ini External LED pin header for attaching remote LEDs. Designed to be powered via SCSI termination power, when provided by the host Optional DB25 pin header for direct installation of an external SCSI connector, in addition to the Single-Ended 50 pin IDC connector Identical dimensions and mounting holes as that of SCSI2SD V5.1, V5.2, and V6, making it compatible with many existing SCSI2SD-specific mounting solutions 74LVTH125 SCSI bus transceivers